Statement 450S
Stereo Power Amplifier

The 225-watt/channel Statement 450S is a reduced-scale application of all of the techniques, concepts, and parts developed for the larger Statement 450. It is appropriate for the highest quality systems where space is a consideration or where extreme power is not needed. The 128-pound audio chassis is floated via an energy decoupling tripod atop the 84-pound power supply. Simply put, this heirloom quality instrument is second only to the Statement 450 monoblocks for reproducing music with the “breath of life” that is always our goal.

Product Brochure
Statement 450S
  • Mechanical Design
    The overall architecture of the amplifier hassis minimizes the presenta-tion of external vibration. The internal parts are the finest kind, specificallchosen for sound and reliability. We start with 0.25” aircraft aluminum for a rigid basis, and tailor the mounting points and couplings for the desired result. Custom machined feet provide a slight, controlled decoupling of the power supply from the external environment, while the audio chas-sis connects via a tripod of custom designed stainless steel cups and balls, controlling of the flw of vertical energy inputs and dissipating lateral energy inputs. The chassis is finished in a metallic base coat/clear coat finishThe sculptured faceplates must have been made from a solid block of alumi-num — they are 3/8 inch thick with the edges chamfered to about 1/4 inch. Finished in silky gold-speckled black, the faceplates are an almost artistic likeness of the VAC’s sound quality. To guarantee quality, all chassis parts and lacquering are done in-house.

    Electrical Design
    The hand-wiring approach presented in the Statement 450 far exceeds con-ventional hand wiring and previous three dimensional techniques. Careful architecture and orientation of parts in 3D allows passive control of radiated fields to an unprecedented degree for an audio amplifi. Special consid-eration of the ways in which they interact with the chassis, sensitive circuit points, and each other increases purity and resolution. Between the two chassis, 105 lbs. of custom magnetic transformers contribute to the corre-sponding optimal mass loading. The Statement 450 features a direct-coupled input and driver circuit, extremely fast and vivid sound is achieved from both single-ended and balanced sources

    VAC’s Very High Speed Parallel (VHSP)
    This technique uses fast, lithe devices in an analogue parallel processing configuation that allows the speed and control required to preserve delicacy and natural sound.

    The Very Low Impedance Driver (VLID)
    This circuit gains much greater control over the transfer function achieved in the output stage, improving linearity and increasing headroom. There is pal-pably more control, greater subjective power per watt, and increased detail.

    Power Supply
    The external power supply also uses custom transformers, wound in the USA; there are no lightweight off-the-shelf magnetics here. The three massive transformers, which power seven separate basic supplies, are isolation mounted in a separate shielded segment of the power supply chassis and potted in place with a special material to ensure low mechanical noise and vibration.

     
  • Wattage

    225 watt/channel

    Gain

    37 dB, SE

    31 dB, balanced

    Frequency response

    4 Hz to 75 kHz

    Power bandwidth

    20 Hz to 70 kHz

    Inputs

    Single-ended input via RCA jack, non-inverting

    Balanced input via XLR jack, non-inverting relative to pin 2 (“pin 2 hot”, traditional
    EIA/RCA broadcast/recording standard); amp is fully balanced in this mode

    Outputs

    Connections to precisely match loudspeaker loads of 2, 4, and 8 ohms

    Tubes

    8x KT88

    6x 6SN7

    Residual noise

    Typically, 700 microvolts at the speaker terminals

    Voltage

    May be factory configured for operation at 100, 120, 220, or 230/240 volts

    Power Cord

    Detachable power cord, standard IEC power receptacle

    12-volt Trigger

    included

    Illumination

    Illuminated logo may be switched off

    Finish

    Hand-rubbed gold-flake gloss black lacquer with chrome knobs standard.

    Hand-rubbed metallic gloss silver lacquer with chrome knobs special order with additional cost.

    Warranty

    Two years parts and labor, excluding tubes (USA, see manual for full details)

    Dimensions (H x W x D)

    Audio chassis (not including knobs and connectors): 9.75 x 17.8 x 18.25 in. (24.8 x 45.2 x 46.4 cm.)

    Power supply (not including connectors): 5.5 x 17.8 x 18.25 in. (14 x 45.2 x 46.4 cm.)

    Shipping weight

    Audio chassis: 128 lbs. (58.2 kg.)

    Power supply: 84 lbs. (36.4 kg.)

    *Specifications subject to change without notice.